Voltage Regulators

Description

Stabilize your builds with the steady voltage they need to be at their best! Our beloved consoles were not designed to do some of the things we’re pushing them to do, which results in things like flickering backlights and dim displays to electrical brown-outs that crash the console.
These voltage regulators alleviate the strain of our modern modifications from the stock voltage regulators that were designed just for the console. By wiring a supplementary voltage regulator to the ‘unregulated voltage’ pins in a console, you can draw directly from the batteries and ’step-up’ that voltage to supply a modification with what it needs.
Pololu 5V Step-Up/Step-Down Voltage Regulator
This switching regulator uses the SEPIC topology to produce 5 V from input voltages between 2.5 V and 18 V. The wide input range coupled with its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 5 V. The compact (0.4″ × 0.575″) module can supply over 400 mA in typical applications.
3.3V Step-Up (Boost)
Output voltage: DC 3.3V±2%
Output current:
Input: DC 0.8V ~ 3.3V
High efficiency : 95% (usually is 75%-93%)
Low ripple and Low noise
Ultra-small size: 10mm x 10mm
5V Step-Up (Boost)
Output voltage: DC 5V±2%
Output current:
Input voltage: DC 1 ~ 5V
High efficiency : 95% (usually is 76%-93%)
Low Quiescent Current : 13uA
Ultra-small size: 10mm x 10mm
5V Step-Up/Step-Down (Buck/Boost)
Output voltage: DC 5V±2%
Output current: 600mA
Input voltage: DC 3 ~ 15V
High efficiency: 75%
Small size: 19mm x 14m x 4mm