NEW Lucent FW300F1 DC-DC Converter Power Module 48VDC IN 3.3 VDC OUT AT 198w

Description

The auction is for ONE Lucent Technologies DC/DC converter under the MPN: FW300F1.  These Converters are new excess and have never been installed on any board.  The Vdc in is 48 , the Vdc out is 3.3 at 198W.
Ordering Information
Input Voltage
Output Voltage
Output Power
Device Code
Comcode
48 V
3.3 V
165 W
FW250F1
107859886
48 V
3.3 V
198 W
FW300F1
107253163
Features
■
Size: 61.0 mm x 116.8 mm x 13.5 mm
(2.40 in. x 4.60 in. x 0.53 in.)
■
Wide input voltage range
■
High efficiency: 79% typical
■
Parallel operation with load sharing
■
Output voltage set-point adjustment (trim)
■
Thermal protection
■
Synchronization
■
Power good signal
■
Output current monitor
■
Output overvoltage and overcurrent protection
■
Constant frequency
■
Case ground pin
■
Input-to-output isolation
■
Remote sense
■
Remote on/off
■
Short-circuit protection
■
Output overvoltage clamp
Description
The FW250F1 and FW300F1 Power Modules are dc-dc converters that operate over an input voltage range of
36 Vdc to 75 Vdc and provide a precisely regulated dc output. The outputs are fully isolated from the inputs, allowing versatile polarity configurations and grounding connections. The modules have maximum power rat- ings from 250 W to 300 W at a typical full-load efficiency of 79%.
Two or more modules may be paralleled with forced load sharing for redundant or enhanced power applications. The package, which mounts on a printed-circuit board, accommodates a heat sink for high-temperature applications.
*