iFlight Chimera7 HD SucceX-D F7 Long Range FPV Drone Caddx Camera TBS Receiver

Description

※
Specification:
Brand Name: iFlight
Model: Chimera7 Long Range Version (HD) FPV Drone
Wheelbase: 320mm
Main Body Dimension: 258*199mm
Bottom to Top Distance: 20mm
Arm Thickness: 6mm
Bottom Plate Thickness: 3mm
Top Plate Thickness: 2mm
Upper(middle) Plate Thickness: 3mm
Camera Plate Thickness: 3mm (included TPU inserts)
Propeller: Gemfan 7040 3-Blade Propeller (Color may vary)
Weight: 628.1 (without Battery)
Flight Time: 17-19 Mins (Take Example as 6S 4500mAh Lipo)
Recommend Battery: 6S 4000-4500mAh Li-po Battery
ID: IF-Chimera7-HD-Race-BNF-TBS-RX
※Package Included:
1x Chimera7 Drone (HD Ver)
1x Receiver
1x Camera
1x DJI FPV Air Unit Module1x Polar Vista Air Unit
2x 5.8G Albatross RP-SMA Antenna LHCP 150mm
2x Gemfan 7040 Propeller CW
2x Gemfan 7040 Propeller CCW
4x 20x250mm PU Leather Battery Strap (Color May Vary)
※Package doesn’t Includes:
Remote Control
Battery
Charger
FPV Glasses
※SucceX-D F7 V2.1 TwinG Flight Controller
MCU: 216MHz STM32F722
Gyroscope: 2x ICM20689
Barometer: YES
Blackbox: 32MB
Betaflight OSD:  YES
BEC: 5V 2.5A / 9V 2.5A
Current sensor scale:  100
Inverter for SBUS input (UART2-RX)
Smartaudio & Tramp VTX protocol supported
Beeper pad: Yes
RSSI input pad: No
UARTs: 5
Motor outputs: 8
8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
BLHeli32 Telemetry：RX5
Input voltage: recommended 2-6S, MAX 8S
Firmware Target:   IFLIGHT_F722_TWING
Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
Dimensions:  36x36mm
Weight: 7.5g
USB type-C
※SucceX 50A BLHeli_32 4in1 ESC
MCU: STM32F051
Up tp 48kHz PWM frequency
Capacitance: 470uF/50V
Current Sensor: Yes
Input: 2-6S LIPO
Constant: 50A / Burst: 60A
BlHeli32 telemetry: Yes
BEC: No
Supports up to Dshot1200, Proshot, Oneshot, Multishot
Target: iFlight-BL32-4IN1
Weight: 14.4g
Size: 43x39mm (including the power pads)
Mounting Hole: 30.5x30.5mm/Φ3mm
※XING 2806.5 1300KV Motor
Voltage: 2-6S
KV: 1300KV
Configuration: 12N14P
Bearing: NMB 11*5*5
Stator Diameter: 28
Stator Length: 6.5mm
Shaft Diameter: M5
No.of Cells(Lipo): 2-6S
Weight: 49.5g(with a short cable)
Motor mount hole: 19x19 φ3mm
※Features:
6mm rigid arm design for more stiffness
Top- and bottom battery mount option XING 2806.5 efficient wide stator motors
GPS pre-installed for more safety at distance TPU Bottom Stand for Gopro Camera (Camera and Camera Mount are NOT included)
360° TPU protection, DJI cam protection and antenna mounts
DJI FPV Air Unit, buttery-smooth 720p120fps FPV feed (TPU soft mounted)
No props in view (DJI Air unit record in 1080p/60fps) Battery voltage LED status light (illuminated IF logo on the bottom)
※Shipping Policy:
1, We ship to US, CA, UK, FR, DE, RU, AU, JP, Most EU Countries. If you are in other country, please contact me for shipping details before purchasing.
2, Buyers from Israel, Brazil, and South American, Middle East please contact seller for shipping, coz maybe sometimes we can not ship to your country coz of shipping limitation.
3, Shipping takes 6-18 business days.
※Return Policy:
We only wish to deal with serious buyer.
If your item got any problem, please contact with me, we will help to solve and, we are very familiar with this product.
Please don't easily open a return request on eBay when you find a problem, that will lead into a bad seller performance, we will help to the end.
※INTERNATIONAL BUYERS PLEASE NOTE
Import Duties, Taxes, and Charges are not included in the item price or shipping cost, These charges are the buyers responsibility. But we can help to avoid this, please contact.
Please check with your country custom office to determine what these additional cost will be prior to buying or biding.
eBay Cross Border Trade powered by ChannelEffect