-40%

Daly Waterproof 7S 24V 40A Lithium Ion Battery Management System, with Balancing

$ 12.93

Availability: 93 in stock
  • Size: 80x61x16 mm
  • All returns accepted: Returns Accepted
  • Product Type: Battery Management System
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • Type: Protection Board
  • Nominal Voltage Rating (DC): 24 V
  • Device Function: Battery Management System
  • Nominal Current Rating: 40 A
  • Input Voltage Range: 16.8 - 30.1
  • Country/Region of Manufacture: China
  • Inrush Current Rating: 120 A
  • Maximum Continuous Output Current: 40A
  • Output Voltage Rating (DC): 24 V
  • Brand: Daly
  • Nominal Power Rating: 1000 W
  • MPN: Does not apply
  • EAN: Does not apply
  • Condition: New
  • Maximum Peak Output Current: 120A

    Description

    A battery management system (BMS) is essential in a lithium ion battery build. Li-ion batteries are much more sensitive to voltage than lead acid, and can be dangerous if over- or under-charged. This BMS is for a 7S (25.9v nominal) lithium ion battery. It protects against over- and under-voltage as well as over-current, and ensures that the cells are balanced.
    To wire, you will need to battery and charge/load ground the 10AWG wires attached to the board. You will also need to tie each of the balance leads into the individual battery cells. Note that this has a common charge and load connection, not separate as some boards have. Balance wiring is not shown, but is included.
    This BMS is suited for smaller projects, but don't expect it to be adequate to protect a large build such as an off-grid power wall. This is perfect for eBike and scooters up to 1000 watts, as well as RC projects. And the case is waterproof, so you can ride anytime, anywhere.
    See photos for specifications.
    A Note on Shipping
    We ship via USPS. This will typically ship First Class.
    Returns
    Please contact us within 30 days to arrange a return. Buyer is responsible for return shipping. We cannot accept returns that have been soldered unless it was due to board malfunction. We will ask for photos before accepting returns due to defects.
    About Us
    We are a small, family-owned outfit that specializes in advanced power storage for mobile, alternative energy, and personal electronics charging applications. We focus on the DIY community because we are a part of the DIY community. Our shop is 100% off-grid solar powered, with powerwall made entirely of reused
    lithium cells.