Bully 220 Carbon Fiber Racing Drone Kit with FPV Goggles ESC RC Quadcopter Gift

Description

Bully 220 Racing Drone Kit with FS-i6X Remote Control SKY02X FPV Glass ESC RC Quadcopter
BULLY 220 DRONE
Carbon fiber material looks hard and lightweight which perfectly solve many problems of pilots' early flights.
Pilots can enjoy about 5 minutes of flight time.
NOTE
Doesn't include batteries or 3S cameras.
Buyers are recommended to buy 1300 - 1500 mAh 4s above 80c batteries by themselves.
FlySky FS-i6X Remote Control
This is specially designed for FPV Drone Racing starters.
The RC uses LCD backlight dot matrix screen, full angle gain antenna, 4 x 5AA battery, low voltage alarm.
Compared to other 6 ways RCs this model adds the function of runaway protection, 2 way system, data 2 way back pass, can automatically hop, round the edge of the hand, in line with artificial body.
TM89VQ Remote Control
SPECIFICATIONS
Frequency: 2.4G (2403MHz - 2447MHz)
2.4G System: NRF24L01 and CC2500
Channel: 8
System: Bayang Protocol / Frsky Protocol
Power: =<80 mw
Model Type: Multi Rotor
Support USB Charging
Support FPV Simulator Connected
Output: PPM, Support Student Radio Mode
LED Light: Green-Power On/ Red-Warning / Blue-Normal
Battery: 1 x 350 mAh 2S Battery (Removable)
Weight: 227.4g (with Battery)
HOW TO SWITCH THE PROTOCOL (D16 / D8 Version)
Press and hold the bind button then press the power button until the purple light is flashing. The fleshing LED indicates different protocol of the Lite  Radio works on.
LED Status            Protocol Version
Flash Once            Frsky D16 FCC
Flash Twice           Frsky D16 LBT
Flash Thrice           Frsky D8
SKY02O FPV GOGGLES
FEATURES
Steady View Receiver, Merge 2 signal into 1, make image more stable and clear in challenging condition.
Intuitive Interface, Colorful UI with 2 languages
640 x 400 OLED Screen, High contrast ration
Support 4 preset screen settings and 3 customized settings for different condition of flight.
Easy to access with IO port on the bottom.
Compatible with Fatshark diopter lens
SPECIFICATIONS
Model: SKY02O
Screen: OLED
Resolution: 640 x 400
FOV: 29 degrees
IPD: 59 - 69 mm
Aspect Ratio: 16:10
Receiver: 5.8 Ghz 48 CH Steady View Receiver Built in
DVR: MJPEG 30 FPS
Head Tracker: 3 axis Accelerometer, 3 axis gyroscope
Voltage Input Range: 2-6S LiPo
Dimensions: 167 x 70 x 79 mm
Weight: 210 g
Package Content: Goggle Set, Patch antenna, Ommi antenna
VR009 FPV GOGGLES
SPECIFICATIONS
Functions: Video
FPV Goggles
Resolution: 480 x 320
TV System: NTSC / PAL Switchable
Screen size: 3 inch
Battery: 3.7V 1200mAh Li-ion polymer battery
Working Time: 2.5 hours
Charge time: 2 hours
Main Features:
Portable, small size and light weight
Low power consumption, working current: 300 - 330mA
Double antenna reception to make the signal more stable
One key auto-searching function, fast and accurate
3 inch 480 x 320 high brightness LCD screen
Built-in super sensitiveness 5.8GHz 40CH receiver, especially with RaceBand
Built-in 3.7V 1200mAh high-capacity Li-ion polymer battery for long time using
Universal USB charging interface
Very low time-delay real-time video return ( 10 - 20ms )
Bilingual menu, support Chinese and English
Support external Audio video signal input
Support AV signal output ( connect external DVR )​
​
PARAMETERS OF THE DRONE
220mm Racing Frame Kit
Wheelbase: 220mm
Arm thickness: 4mm
X plate thickness: 2mm
Floor thickness: 2mm
Upper plate thickness: 2mm
Side panel thickness: 2mm
Frame kit material: 3K carbon fiber & CNC 6065 aluminium
2306 2450KV 3-5S Brushless Motor
Motor kv: 2450rpm/v
No-load current (IO/10V): 1.48A
Support lithium battery section: 3-5S
Weight: 32.5 grams
Maximum continuous current: 41A
Maximum continuous power: 820W
Maximum thrust: 1368g (4s/6")
Configuration: 12N/14P
Motor resistance (Rm): 0.0381Ω
Stator diameter: 23mm
Stator thickness: 6 mm
Motor diameter: 28.5 mm
Motor length: 19.7mm
Total length of shaft: 34.7mm
Axis thickness: M5
Mounting hole spacing: 16*19mm
Mounting screw: M3
Recommended propeller: 5 inches
TCMM 30A BLHELI_S 4 in 1 ESC
Continuous current: 30A
Peak current: 35A (10s)
Input voltage: 2-4s
BEC: 5V 3A-BEC
Firmware: blheli_s supports DSHOT 150-600 / MULTISHOT / PWM / ONESHOT125
MOS: 3*3
Ammeter: none
Weight: 28g
Mounting hole: 30.5x30.5mm / Φ4. 0
Size: 36*36mm
Omnibus F4 V3 flight controller
Project Name: Omnibus F4 V3 Flight Controller
Size: 36x36 mm
Mounting hole: 30.5x30.5mm
FEATURS
STM32 F405 Microcontroller
Support 2-4s power supply
DSHOT support
Configure drag and drop OSD via BetaFlight Configurator
SmartAudio V2 support – adjust the PID and configure Omnibus FC from the transmitter
MPU6000 6-axis SPI gyro and accelerometer
SBU/PPM and Spketrum DSMX ports
microSD card black box
barometer (BMP280)
5V2A BEC
Image filter (5V can only be supplied to VTX and camera)
The firmware is Betaflight_3.1.7_OmniBusf4sd
Brush BF/CF/INAV/PIX firmware
RUNCAM Swift 2 Camera
Image sensor: 1/3 SONY SUPER HAD II CCD
Horizontal resolution: 600TVL
Signal format: NTSC/PLA (switchable)
Integrated microphone: yes
Integrated OSD: Yes
Electronic shutter: PLA: 1/50-100000 NTSC: 1/60-100000
Signal to noise ratio: >60DB (AGC OFF)
Lens: 2.5mm (default)
Wide dynamic: digital wide dynamic
Digital noise reduction: 2D noise reduction
Day and night switching: color / automatic / black and white
Support voltage: 5v-36v
Size: 28.5*26*26mm
Weight: 14g
5.8G 40CH 25/200/600mw switchable VTX
Output power and transmission distance: ≥0.5km@25MW, ≥1km@200MW, ≥2km@600MW
Transmitting power: 0 mw/25 mw/200 mw/600 mw
Complete video format: NTSC/PAL
Input voltage and power consumption: 7V~24V, +12V/260MA@600MW
Size: 36 × 36 × 5mm
Weight: ≤7g (except antenna)
With output power self-test function.
Digital tube scanning: frequency (1-8), frequency band (A-E), power (1-3, 0 = 0 MW, 1 = 25 MW, 2 = 200 MW, 3 = 600 MW)
DALPROP T5046C three-bladed propeller
Specification: 5046*3
Brand Name: DALPROP
Product Name: 5046 Propeller
Material: imported PC
Quantity: 10 pairs
Color: blue
Weight: 4g / only
Center hole: 5mm
Spiral diameter: 127mm
Wheel thickness: 8mm