Battery Protection Board Replacement With Heat Sink Accessories Useful

Description

Product Description
Battery Protection Board Replacement With Heat Sink Accessories Useful
Features:
This product is 4 string 16.8V Li-ion Lithium battery protection board. With a balanced. With heat sink.
Protection board with overcharge protection, over discharge protection, over current protection, short circuit protection, temperature protection.
Size: 70 * 60* 8.5mm
Products with 10 MOS tube, powerful cooling aluminum, continuous current limit of 100A. Applicable to inverter, xenon lamp, solar street lights and other 4S battery pack.
T point Description: plus a normally closed temperature sensor switch can expand the role of temperature protection, need to remove the solder joint next to the 0R resistance.
Note: 3A current above the discharge products, the battery discharge rate to 3C or more.
Magnification calculation formula: 1C magnification of the battery, 2000 capacity is equal to 2AH * 1 = 2A upper limit current. 3C magnification battery, 2000 capacity equal to 2AH * 3 = 6A upper working current.
In the use of the battery will heat is Battery magnification is not applicable, this situation can not be long-term use, the battery will soon be damaged.
Specifications:
Discharge:
Continuous Discharging Current:100A(MAX)
Instantaneous Discharge Current:150A
Charge:
Charging Voltage:12.6V
Charging Current:10A(MAX)
Overcharge Protect:
Over-charge Detect:4.28±0.05V
Protect Delay:0.5S
Over-charge release:4.08±0.1V
Balance:
Detect Voltage:4.20±0.05V
Release Voltage:4.20±0.05V
Balance Current:42±5mA
Over-discharge Protect:
Over-discharge Detect:2.8±0.1V
Over-discharge Detect delay:0.1S
Release Voltage:3.0±0.1V
Over-current Protect
Detect Voltage:150mV
Detect Delay:9mS
Current Detect:200±10A
Release Condition:Cut Load
Short-circuit Protect:
Protect Condition:Load Short Circuit
Detect Delay:250uS
Release Condition:Cut Load
Resistance:Inner≤25mΩ
Self-Consumption:
Working Current:≤20uA
Sleep Current (when Over-discharge):≤10uA
Working Temperature:-30/+80℃
Size:70×51.5×10mm / 2.75×2.02×0.39"
Package Includes:
1×Battery Protection Board
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Payment
We accept payment via Paypal only.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
Delivery details
We only
ship to confirmed Paypal addresses.
Please comfirm that your paypal address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Contact us
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.