600W DC-DC Step Up Boost Buck Voltage Converter High Power Supply Module 16A

Description

600W DC-DC Step Up Boost Buck Voltage Converter
High Power Supply Module 16A
Specification:
Module name: 600W boost constant current module
Module nature: non-isolated boost module (BOOST) (can't step down)
Input voltage: Two input voltage ranges are optional, (selected by the jumper cap on the board)
1. 8-16V input (for three-string lithium battery and 12V battery application) In this input state, please do not overvoltage input, otherwise it will burn the module!!!
2. 12-60V input factory default range (for wide input voltage range applications)
Input current: 16A (MAX) over 10A, please strengthen heat dissipation. The fan interface is reserved on the board, which can be used for fan power supply and heat dissipation.
Static working current: 15mA (when 12V rises to 20V, the higher the output voltage, the static current will increase)
Output voltage: 12-80V continuously adjustable (default output 19V, if you need other voltage, please explain to the shopkeeper.)
Output current: 12A MAX. Please strengthen heat dissipation if it exceeds 10A (related to the input and output pressure difference, the larger the pressure difference, the smaller the output current)
Constant current range: 0.1-12A
Output power: = input voltage*10A, such as: input 12V*10A=120W, input 24V*10A=240W,
Input 36V*10A=360W, input 48V*10A=480W, input 60V*10A=600W
If you need more power, you can use two modules in parallel. For example, if the output is 15A, you can use two modules in parallel.
Just adjust the current of each module to 8A.
Working temperature: -40~+85 degrees (please strengthen heat dissipation when the ambient temperature is too high)
Working frequency: 150KHz
Conversion efficiency: up to 95% (efficiency is related to input, output voltage, current, and pressure difference)
Overcurrent protection: Yes (when the input exceeds 17A, the output voltage will be automatically reduced with a certain range of error.)
Short circuit protection: Yes (input 20A fuse) double short circuit protection, safer to use.
Input reverse connection protection: None, (if necessary, please put a diode in series in the input)
Output anti-reverse injection: Yes, no anti-reverse diode is needed when charging.
Installation method: 2PCS 3mm screws
Wiring mode: terminal block welding-free output
Module size: 76*60*56mm (length*width*height)
Module weight: 205 grams
-------------------------------------------------- ----------------------------------------------
Application scope:
1. DIY a regulated power supply, input 12V, and output adjustable from 12-80V.
2. To supply power to your electronic equipment, you can set the output value according to your system voltage.
3. As a vehicle power supply, it can supply power to your laptop, PDA or various digital products.
4. DIY a high-power notebook mobile power supply: equipped with a large-capacity 12V lithium battery pack, so that your books can be bright wherever you go.
5. The solar panel voltage stabilizes.
6. Charging batteries, lithium batteries, etc.
7. Drive high-power LED lights.
Instructions:
1. Input voltage range selection: The factory default is 12-60V input. When you use 12V battery or three-string or four-string lithium battery, you can short the jumper in the figure above with a jumper cap to select 9-16V input.
2. Output current adjustment method:
1. Adjust the CV potentiometer, according to your battery or LED, set the output voltage to the voltage value you need. For example, the voltage of 10 strings of LEDs is adjusted to 37V, and the four strings of batteries are adjusted to 55V.
2. Set the CC potentiometer about 30 turns counterclockwise, set the output current to the minimum, connect the LED, and adjust the CC potentiometer to the current you need. For battery charging, after the battery is discharged, connect to the output and adjust CC to the current you need. (When charging, you must use the discharged battery to adjust it, because the battery has more power. More, the lower the charging current.) Please do not adjust the current in a short-circuit mode. The circuit structure of the boost module cannot be adjusted in a short-circuit mode.
Package Includes:
1 x 600W DC-DC Step Up Boost Buck Voltage Converter High Power 16A