-40%

1000W ZVS Low Voltage Induction Heating Board Module Flyback Driver Heater DIY

$ 14.88

Availability: 182 in stock
  • Return shipping will be paid by: Buyer
  • MPN: Does Not Apply
  • Restocking Fee: No
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Item must be returned within: 30 Days
  • Condition: New
  • Brand: Unbranded
  • All returns accepted: Returns Accepted

    Description

    Features:
    This section of induction heating uses low-voltage DC power supply 12-48V.
    Maximum current 20A, maximum power 1000W.
    Tested 53V power supply when working properly.
    Because of its moderate power, can be used for small parts DIY players do hardening, annealing and other heat treatment.
    Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient.
    24V input with no load current of 3A, 48V input with no load current of 6A.
    The higher the voltage, the greater the heating current when the same thing, the effect is better.
    But at the same time heat is also large, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough.
    The coil accepts 40mm crucible.
    Note:
    1. The kit contains a full set of driving circuit elements and brass.
    2. Buyers need to bring their own power and cooling unit.
    3. The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.
    4. The use of switching power supply, Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components.
    So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
    5. The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.
    Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload.
    This circuit can not only do the induction heating, the copper tube into the high-frequency transformer, is a powerful inverter.
    1. To increase the heat sink using a customized substrate as thick as 8.5mm!
    Cooling capacity is very powerful.
    2. Using the M4 pillars, fever smaller, more efficient.
    Specifications:
    Power Supply: 12-48V
    Max. Current: 20A
    Max. Power: 1000W
    Inside Dia. of the Coil: 40mm
    Height of the Coil: 50mm
    Board Size: 11 * 10 * 3.5cm / 4.33 * 3.94 * 1.4in
    Board Weight: 377g / 13.32oz
    Package Weight: Approx. 520g / 18.34oz
    Package List:
    1 * ZVS Low Voltage Induction Heating Board
    1 * Brass
    FM Transmitter Wireless Microphone Surveillance Frequency 88-108MHz Top Module
    1.79 USD
    1.88 USD
    0.9 USD
    5%
    off
    1PCS Mini SI4432 Remote Wireless Transceiver Communication Module 240MHZ-930MHZ
    1.88 USD
    0.9 USD
    ESP8285 development board NODEMCU-M ESP-M2 WIFI module compatible with NODEMCU
    3.35 USD
    3.89 USD
    0.9 USD
    14%
    off
    1PCS NEW CC1101 wireless module Long Distance Transmission Antenna 868MHZ
    2.75 USD
    2.99 USD
    0.9 USD
    8%
    off
    Ra-01 SX1278 LoRa Spread Spectrum Wireless Module 433MHz Serial SPI Interface
    3.27 USD
    3.8 USD
    0.9 USD
    14%
    off
    1set GPRS GSM GPS BDS A9G Development Board GPS Antenna SMS Voice Wireless
    10.11 USD
    10.99 USD
    1.0 USD
    8%
    off
    1set SIM800L V2.0 5V Wireless GSM GPRS MODULE Quad-Band With Antenna Cable
    8.17 USD
    8.88 USD
    1.0 USD
    8%
    off
    Wireless Serial 4 Pin Bluetooth RF Transceiver Module HC-06 RS232 With backplane
    3.4 USD
    0.9 USD
    1set PN532 NFC RFID Wireless Module V3 User Breakout For Arduino For Android
    4.99 USD
    0.9 USD
    ESP8266 Wireless Remote Serial Port WIFI Module Transceiver Board ESP-12E+STA
    1.89 USD
    1.99 USD
    0.9 USD
    5%
    off
    1pcs Bluetooth 4.0 Audio Stereo Wireless Speaker Receiver Module Power Amplifier
    1.98 USD
    2.3 USD
    0.9 USD
    14%
    off
    1pcs HB100 Microwave Doppler Radar Wireless Module Motion Sensor
    2.08 USD
    2.42 USD
    0.9 USD
    14%
    off