1000W ZVS Low Voltage Induction Heating Board Module Flyback Driver Heater Brass

Description

1000W ZVS Low Voltage Induction Heating Board Module Flyback Driver Heater Brass
Product Specification:
Brand new
This section of induction heating using low-voltage DC power supply 12-48V
Maximum current 20A, maximum power 1000W
Tested 53V power supply when working properly
Because of its moderate power, can be used for small parts DIY players do hardening, annealing and other heat treatment
Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient
Inside diameter of the coil: approx. 40mm
Height of the coil: approx. 50mm
24V input with no load current of 3A
48V input with no load current of 6A
The higher the voltage, the greater the heating current when the same thing, the effect is better
But at the same time heat is also large, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough
It suits 12-36V power supply (not included)
The coil accept 40mm crucible
Package included:
1 x
1000W
ZVS low voltage induction heating board
1 x Brass Coil
Note:
The kit contains a full set of driving circuit elements and brass
Buyers need to bring their own power and cooling unit.
The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.
The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components
So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit
Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload
This circuit can not only do the induction heating, the copper tube into the high-frequency transformer, is a powerful inverter.
To increase the heat sink using a customized substrate as thick as 8.5mm! Cooling capacity is very powerful.
Using the M4 pillars, fever smaller, more efficient.
We only accept the payment by Paypal.
Buyers are required to carefully follow payment instructions on the checkout page, and note down any necessary details on it (e.g. bank account details).
If buyers fail to follow the instructions on the checkout page, We are not liable for any unidentified payments and subsequent delivery delays.
If you are paying through Paypal using eCheck, note that your item can be shipped only after eCheck has cleared.
All payments are expected within 4 days after the last winning auction is closed. A non-payment dispute will be opened if full payment is not received automatically.
Our warehouse is located in US
. All orders will be shipped from our US warehouse.
Combined shipping discount  is offered. Please kindly contact us freely if you need.
Delivery times may vary, especially during peak periods. Delivery is not available during weekends or public holidays.
All items will be shipped to the address on Ebay order. Buyers have full responsibility to provide us with the correct delivery address on the checkout page before payment is made.
Re-delivery fee may be charged to buyers for items that are undelivered and/or returned to us due to incorrect delivery address or unsuccessful deliveries.
If it is the buyer's personal reason to return the item, the return postage fee would be at buyer's charge. 30 days return and exchange is offered.
Returns must be agreed by both parties prior to the actual return with 30 business days.
Buyers must also strictly follow our returns procedure when returning an item.
We reserves the rights to provide buyers a replacement, parts or a full or partial refund. Charges may apply if the product is damaged by buyers when the returned item is received.
We make sure everything we do honors that connection – from our commitment to the highest quality items we can achieve, to the way we engage with our customers and communities to do business responsibly.
You Are guaranteed to have your items delivered or your money back
Shipment in US,Fast delivery guaranteed
Product Specification:
Brand new
This section of induction heating using low-voltage DC power supply 12-48V
Maximum current 20A, maximum power 1000W
Tested 53V power supply when working properly
Because of its moderate power, can be used for small parts DIY players do hardening, annealing and other heat treatment
Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient
Inside diameter of the coil: approx. 40mm
Height of the coil: approx. 50mm
24V input with no load current of 3A
48V input with no load current of 6A
The higher the voltage, the greater the heating current when the same thing, the effect is better
But at the same time heat is also large, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough
It suits 12-36V power supply (not included)
The coil accept 40mm crucible
Package included:
1 x
1000W
ZVS low voltage induction heating board
1 x Brass Coil
Note:
The kit contains a full set of driving circuit elements and brass
Buyers need to bring their own power and cooling unit.
The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.
The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components
So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit
Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload
This circuit can not only do the induction heating, the copper tube into the high-frequency transformer, is a powerful inverter.
To increase the heat sink using a customized substrate as thick as 8.5mm! Cooling capacity is very powerful.
Using the M4 pillars, fever smaller, more efficient.
PAYMENT
We only accept the payment by Paypal.
Buyers are required to carefully follow payment instructions on the checkout page, and note down any necessary details on it (e.g. bank account details).
If buyers fail to follow the instructions on the checkout page, We are not liable for any unidentified payments and subsequent delivery delays.
If you are paying through Paypal using eCheck, note that your item can be shipped only after eCheck has cleared.
All payments are expected within 4 days after the last winning auction is closed. A non-payment dispute will be opened if full payment is not received automatically.
SHIPPING
Our warehouse is located in US
. All orders will be shipped from our US warehouse.
Combined shipping discount  is offered. Please kindly contact us freely if you need.
Delivery times may vary, especially during peak periods. Delivery is not available during weekends or public holidays.
All items will be shipped to the address on Ebay order. Buyers have full responsibility to provide us with the correct delivery address on the checkout page before payment is made.
Re-delivery fee may be charged to buyers for items that are undelivered and/or returned to us due to incorrect delivery address or unsuccessful deliveries.
Terms of Sale
If it is the buyer's personal reason to return the item, the return postage fee would be at buyer's charge. 30 days return and exchange is offered.
Returns must be agreed by both parties prior to the actual return with 30 business days.
Buyers must also strictly follow our returns procedure when returning an item.
We reserves the rights to provide buyers a replacement, parts or a full or partial refund. Charges may apply if the product is damaged by buyers when the returned item is received.
ABOUT US
We make sure everything we do honors that connection – from our commitment to the highest quality items we can achieve, to the way we engage with our customers and communities to do business responsibly.
You Are guaranteed to have your items delivered or your money back
Shipment in US,Fast delivery guaranteed
On Jul-06-21 at 19:36:23 PDT, seller added the following information: